Help installing babl > 0.1.34 - Printable Version

Help installing babl > 0.1.34 - Printable Version

+- Gimp-Forum.net (https://www.gimp-forum.net)
+-- Forum: GIMP (https://www.gimp-forum.net/Forum-GIMP)
+--- Forum: Installation and usage (https://www.gimp-forum.net/Forum-Installation-and-usage)
+---- Forum: Linux and other Unixen (https://www.gimp-forum.net/Forum-Linux-and-other-Unixen)
+---- Thread: Help installing babl > 0.1.34 (/Thread-Help-installing-babl-0-1-34)

Help installing babl > 0.1.34 - crazyBaboon - 10-16-2017

I am trying to install GIMP Git version on a Fedora GNOME 64bit edition.

When I do './autogen.sh' in the gimp folder I get informed about missing dependencies:

Code:

Error: GIMP configuration failed.

  - Error: missing dependency babl >= 0.1.31

  - Error: missing dependency gegl-0.3 >= 0.3.21

  - Error: missing dependency gexiv2 >= 0.10.6

  - Error: missing dependency libtiff

      *** Checks for TIFF library failed: TIFF library not found

  - Error: missing dependency libjpeg

      *** JPEG library not found

  - Error: missing dependency libjpeg

      *** JPEG header file not found

  - Error: missing dependency libjpeg

      *** JPEG library is too old

  - Error: missing dependency libmypaint >= 1.3.0

  - Error: missing dependency rsvg >= 2.40.6

  - Error: missing dependency lcms2 >= 2.8

  - Python 2 headers

      *** Please install them, or skip building the python scripting extension by

      *** passing --disable-python to configure (but then you will not be able

      *** to use scripts for GIMP that are written in Python).

  - PyGTK 2.10.4 or newer

      *** Please install it, or skip building the python scripting extension by

      *** passing --disable-python to configure (but then you will not be able

      *** to use scripts for GIMP that are written in Python).

  - pygtk-codegen-2.0 script

      *** Please install it, or skip building the python scripting extension by

      *** passing --disable-python to configure (but then you will not be able

      *** to use scripts for GIMP that are written in Python).

  - PyCairo 1.0.2 or newer

      *** Please install it, or skip building the python scripting extension by

      *** passing --disable-python to configure (but then you will not be able

      *** to use scripts for GIMP that are written in Python).

See the file 'INSTALL' for more help.

Configure failed or did not finish!

So I tried to install babl:

Code:

git clone git://git.gnome.org/babl

cd babl

./autogen.sh

and the gegl:

Code:

git clone git://git.gnome.org/gegl

cd gegl

./autogen.sh

upon which I get the following error:

Code:

configure: error: Package requirements (babl >= 0.1.34) were not met:

Package 'babl', required by 'virtual:world', not found

Consider adjusting the PKG_CONFIG_PATH environment variable if you

installed software in a non-standard prefix.

Alternatively, you may set the environment variables BABL_CFLAGS

and BABL_LIBS to avoid the need to call pkg-config.

See the pkg-config man page for more details.

I am lost at this point, since I don't know anything about environmental variables. Anyone could help on what to do?

Thanks

RE: Help installing babl > 0.1.34 - Ofnuts - 10-16-2017

In my notes, to build Babl/Gegl, you need to execute

Babl

Code:

./autogen.sh --prefix=$PREFIX --disable-docs

make -j6

make -j6 install

Gegl

Code:

./autogen.sh --prefix=$PREFIX --enable-gtk-doc-html=no --enable-workshop

make -j6

make -j6 install

Where $PREFIX is a variable telling the directory where the executables will be installed (/gimp-dev/install, for me). Adjust "-j" according to local possibilities Smile

A pretty good writeup to generate Gimp: http://ninedegreesbelow.com/photography/build-gimp-in-prefix-for-artists.html

RE: Help installing babl > 0.1.34 - crazyBaboon - 10-16-2017

Thanks!

How do I know the path corresponding to the PREFIX variable?
On the notes you sent me it seems to be 'PREFIX=$HOME/code/gimpdefault/install' but I have no folder called install. I have the directory structure that comes in the git://git.gnome.org/gimp

RE: Help installing babl > 0.1.34 - Ofnuts - 10-16-2017

That folder is really used for the "make install" step (keeping in mind tat in Linux, the location of executables and libraries is often hardcoded). This is were the final exetuables are copied. This should be distinct from the source directories. I have a /Gimp-Dev directory with a /Gimp-Dev/Build subdir with all the source code and I install things in /Gimp-Dev/Install (so I use $PREFIX=/Gimp-Dev/Install). Other popular choices are "/usr/local" (but it requires "sudo make install") and "/opt/gimp" (the "make install" steps creates the required bin/, lib/, share/ subdirs if necessary).

RE: Help installing babl > 0.1.34 - crazyBaboon - 10-16-2017

Thanks!

I followed the instructions on the link you sent me:

Code:

# Set up some folders

mkdir $HOME/code

mkdir $HOME/code/gimpdefault

mkdir $HOME/code/gimpdefault/build

mkdir $HOME/code/gimpdefault/install

mkdir $HOME/code/gimpdefault/install/share

mkdir $HOME/code/gimpdefault/install/share/aclocal

touch $HOME/code/gimpdefault/install/share/aclocal/gimp-2.0.m4

# Clone the software — add to this list as needed on your system.

cd $HOME/code/gimpdefault/build

git clone git://git.gnome.org/glib

git clone git://git.gnome.org/babl

git clone git://git.gnome.org/gegl

git clone git://github.com/mypaint/libmypaint.git

git clone git://git.gnome.org/gimp

# Set up the prefix

PREFIX=$HOME/code/gimpdefault/install

export PATH=$PREFIX/bin:$PATH

export LD_LIBRARY_PATH=$PREFIX/lib:$LD_LIBRARY_PATH

export XDG_DATA_DIRS=$PREFIX/share:$XDG_DATA_DIRS

export ACLOCAL_FLAGS="-I $PREFIX/share/aclocal"

export PKG_CONFIG_PATH=$PREFIX/lib/pkgconfig:$PKG_CONFIG_PATH

export GIO_EXTRA_MODULES=/usr/lib/gio/modules

export SRC_DIR=$HOME/code/gimpdefault/build

# Build and install glib/babl/GEGL/libmypaint/GIMP in the

# prefix — add to this list as needed on your system.

cd $SRC_DIR/glib

./autogen.sh --prefix=$PREFIX

make -j3 && make -j3 install

cd $SRC_DIR/babl

./autogen.sh --prefix=$PREFIX --disable-docs

make -j3 && make -j3 install

cd $SRC_DIR/gegl

./autogen.sh --prefix=$PREFIX --enable-gtk-doc-html=no --enable-workshop

make -j3 && make -j3 install

cd $SRC_DIR/libmypaint

./autogen.sh --prefix=$PREFIX

./configure --prefix=$PREFIX

make -j3 && make -j3 install

cd $SRC_DIR/gimp

./autogen.sh --prefix=$PREFIX --with-gimpdir=$HOME/code/gimpdefault/install/config --disable-gtk-doc

make -j3 && make -j3 install

and I get the following error:

Code:

Error: GIMP configuration failed.

  - Error: missing dependency gegl-0.3 >= 0.3.21

  - Error: missing dependency gexiv2 >= 0.10.6

  - Error: missing dependency libtiff

      *** Checks for TIFF library failed: TIFF library not found

  - Error: missing dependency libjpeg

      *** JPEG library not found

  - Error: missing dependency libjpeg

      *** JPEG header file not found

  - Error: missing dependency libjpeg

      *** JPEG library is too old

  - Error: missing dependency libmypaint >= 1.3.0

  - Error: missing dependency rsvg >= 2.40.6

  - Error: missing dependency lcms2 >= 2.8

  - Python 2 headers

      *** Please install them, or skip building the python scripting extension by

      *** passing --disable-python to configure (but then you will not be able

      *** to use scripts for GIMP that are written in Python).

  - PyGTK 2.10.4 or newer

      *** Please install it, or skip building the python scripting extension by

      *** passing --disable-python to configure (but then you will not be able

      *** to use scripts for GIMP that are written in Python).

  - pygtk-codegen-2.0 script

      *** Please install it, or skip building the python scripting extension by

      *** passing --disable-python to configure (but then you will not be able

      *** to use scripts for GIMP that are written in Python).

  - PyCairo 1.0.2 or newer

      *** Please install it, or skip building the python scripting extension by

      *** passing --disable-python to configure (but then you will not be able

      *** to use scripts for GIMP that are written in Python).

See the file 'INSTALL' for more help.

Configure failed or did not finish!

The good news: it looks like I have installed the babl library successfully, since it does not mention is is missing.

The bad news: the script got stuck at installing gegl>=0.3.21

I checked the 'INSTALL' file and that did not find it particularly helpful.

Any idea on what I am doing wrong?

RE: Help installing babl > 0.1.34 - Ofnuts - 10-17-2017

For tiff/jpeg you may have to install a development packages (ligjpeg-dev/libtif-dev or somesuch), that will give you the header files.

Did you run the "make install" for GEGL?

RE: Help installing babl > 0.1.34 - crazyBaboon - 10-18-2017

(10-17-2017, 07:07 AM)Ofnuts Wrote: For tiff/jpeg you may have to install a development packages (ligjpeg-dev/libtif-dev or somesuch), that will give you the header files.

Did you run the "make install" for GEGL?

Yes, I did. I run the commands specified by http://ninedegreesbelow.com/photography/...tists.html :

Code:

# Set up some folders

mkdir $HOME/code

mkdir $HOME/code/gimpdefault

mkdir $HOME/code/gimpdefault/build

mkdir $HOME/code/gimpdefault/install

mkdir $HOME/code/gimpdefault/install/share

mkdir $HOME/code/gimpdefault/install/share/aclocal

touch $HOME/code/gimpdefault/install/share/aclocal/gimp-2.0.m4

# Clone the software — add to this list as needed on your system.

cd $HOME/code/gimpdefault/build

git clone git://git.gnome.org/glib

git clone git://git.gnome.org/babl

git clone git://git.gnome.org/gegl

git clone git://github.com/mypaint/libmypaint.git

git clone git://git.gnome.org/gimp

# Set up the prefix

PREFIX=$HOME/code/gimpdefault/install

export PATH=$PREFIX/bin:$PATH

export LD_LIBRARY_PATH=$PREFIX/lib:$LD_LIBRARY_PATH

export XDG_DATA_DIRS=$PREFIX/share:$XDG_DATA_DIRS

export ACLOCAL_FLAGS="-I $PREFIX/share/aclocal"

export PKG_CONFIG_PATH=$PREFIX/lib/pkgconfig:$PKG_CONFIG_PATH

export GIO_EXTRA_MODULES=/usr/lib/gio/modules

export SRC_DIR=$HOME/code/gimpdefault/build

# Build and install glib/babl/GEGL/libmypaint/GIMP in the

# prefix — add to this list as needed on your system.

cd $SRC_DIR/glib

./autogen.sh --prefix=$PREFIX

make -j3 && make -j3 install

cd $SRC_DIR/babl

./autogen.sh --prefix=$PREFIX --disable-docs

make -j3 && make -j3 install

cd $SRC_DIR/gegl

./autogen.sh --prefix=$PREFIX --enable-gtk-doc-html=no --enable-workshop

make -j3 && make -j3 install

cd $SRC_DIR/libmypaint

./autogen.sh --prefix=$PREFIX

./configure --prefix=$PREFIX

make -j3 && make -j3 install

cd $SRC_DIR/gimp

./autogen.sh --prefix=$PREFIX --with-gimpdir=$HOME/code/gimpdefault/install/config --disable-gtk-doc

make -j3 && make -j3 install

Interesting enough, I am now trying to install gimp-git via AUR on arch linux and I get the same error as I got before, where it complains BABL version is not high enough...:

Code:

configure: error: Package requirements (babl >= 0.1.34) were not met:

Requested 'babl >= 0.1.34' but version of babl is 0.1.30

Consider adjusting the PKG_CONFIG_PATH environment variable if you

installed software in a non-standard prefix.

Alternatively, you may set the environment variables BABL_CFLAGS

and BABL_LIBS to avoid the need to call pkg-config.

See the pkg-config man page for more details.

This might not be a surprise as the babl-git on AUR seems to be 0.1.30. Could this mismatch be because babl has bumped up two versions (0.1.32 and 0.1.34) in the last two weeks?

Any ideas?

I have got it working!

I have now GIMP-GIT installed on Arch Linux.

However, I had to install the package 'babl-git' from the AUR before I installed 'gimp-git'. Attempting to install only 'gimp-git' straight from the AUR would cause the aforementioned error.

Regards