Posts: 6,340
Threads: 272
Joined: Oct 2016
Reputation:
563
Operating system(s):
Gimp version: 2.10
You can "dual boot" but this is generally a pain, unless one of the OS is for very specific purposes (for instance, keeping Windows for games, since when you play you aren't doing anything else). Now, given the available disk and RAM, it is much more practical to set your mind on a main OS, on which you do most things, and to use a "Virtual machine" to run OS-specific stuff, and that you boot occasionally as an application inside your main OS. The performance of these VMs is very close to what you would get by booting them directly on the hardware (in some cases it is even better).
Posts: 7,133
Threads: 155
Joined: Oct 2016
Reputation:
1,003
Operating system(s):
Gimp version: 2.10
You can, and some people have more than a couple.
Windows 10 can throw a few spanners in the works but there are plenty how-to's around.
For a brand new computer and a new-to-linux user I recommend using a virtual machine (VM). VirtualBox is free. https://www.virtualbox.org/
Two advantages, you do not invalidate your new machine warranty. Make a mistake, delete the VM and start again.
Third advantage, security. Use a linux VM to surf the web, no virus scanners anti-malware applications required. I believe that is what lyle at GC does.
Posts: 546
Threads: 40
Joined: Oct 2016
Reputation:
42
Operating system(s):
- Windows Vista or 7, 8, 10 (64-bit)
Gimp version: 2.10
Thanks guys. Hope to hear back from my girls soon or I will have to do it the old fashioned way. Rent-buy.
I need to get one as soon as possible. Haven't backed up for a while and the hard disk I usually do it to came back to me with one of the essential cords missing so I cannot to that 
Posts: 13
Threads: 0
Joined: Oct 2016
Reputation:
2
Operating system(s):
I have a lenovo B50/80 laptop. It works well. It came with win10 which I ignored as I have a linux disk to install from. Due to my sister buying it for me after work it's only an I3 with 4gig ram but I find it works well enough for Gimp as long as I don't want to do anything past laptop resolution. I find that keeping the drive half empty is a good thing. I have a backup external drive.
Posts: 150
Threads: 31
Joined: Jan 2017
Reputation:
8
Operating system(s):
@sallyanne,
To keep you operating until you get the laptop fan fixed, or a new computer, you could buy a laptop cooler stand. I've just had a look on Amazon and they are available from about £5.00.
You sit the laptop on the stand and it has one or more fans, powered from a USB port, which blows air into the base of the laptop. Even if you get the fan fixed, they are probably worthwhile as laptops seem to struggle to stay cool - I know mine does.
As to the cable you are missing for your back-up drive, again these sort of things are very cheaply available on line. If you need to identify the correct connectors, we may be able to help.
When you have your new computer, the laptop could be a good way to try Linux. I use Ubuntu Linux now for everything and would never consider using Windows again.
Any way we can help, just ask. I will have to consult the experts as to the best way for me to upgrade.
david.
Posts: 546
Threads: 40
Joined: Oct 2016
Reputation:
42
Operating system(s):
- Windows Vista or 7, 8, 10 (64-bit)
Gimp version: 2.10
Thanks David. I was thinking maybe I shouldn't turn it on without a working fan. I turn it off/sleep as soon as it gets hot but am unable to mutitask at the moment. (Play music while doing other stuff)
Posts: 150
Threads: 31
Joined: Jan 2017
Reputation:
8
Operating system(s):
Sallyanne,
Hopefully, if it gets to hot, the computer should throttle its clock speed and everything will slow down dramatically! However, I don't think it is good for the thousands of solder joints on the printed circuit board to be subject to continuous expansion and contraction due to extremes of heat - it will eventually cause dry joints and intermittent faults.
A cheap laptop cooler (with or without the internal fan working) should provide the protection against damage. Just try to get one with large diameter, low speed fans, to avoid too much noise!
Hope this helps.
I am in the process of planning to build a new computer and trying to way-up all the alternatives (which change from week to week as new components are announced). I will probably ask the experts for advice very soon!
david.
Posts: 6,340
Threads: 272
Joined: Oct 2016
Reputation:
563
Operating system(s):
Gimp version: 2.10
(02-08-2017, 10:00 AM)david Wrote: Sallyanne,
Hopefully, if it gets to hot, the computer should throttle its clock speed and everything will slow down dramatically! However, I don't think it is good for the thousands of solder joints on the printed circuit board to be subject to continuous expansion and contraction due to extremes of heat - it will eventually cause dry joints and intermittent faults.
A cheap laptop cooler (with or without the internal fan working) should provide the protection against damage. Just try to get one with large diameter, low speed fans, to avoid too much noise!
Hope this helps.
I am in the process of planning to build a new computer and trying to way-up all the alternatives (which change from week to week as new components are announced). I will probably ask the experts for advice very soon!
david.
Let's face it, innovation on laptops has slowed down quite a bit. You get what you pay for. No more worth-the-wait advances like much enhanced version of Wifi , USB, or Bluetooth.
Posts: 8
Threads: 1
Joined: Jun 2017
Reputation:
0
Operating system(s):
(02-08-2017, 03:03 PM)Ofnuts Wrote: (02-08-2017, 10:00 AM)david Wrote: Sallyanne,
Hopefully, if it gets to hot, the computer should throttle its clock speed and everything will slow down dramatically! However, I don't think it is good for the thousands of solder joints on the printed circuit board to be subject to continuous expansion and contraction due to extremes of heat - it will eventually cause dry joints and intermittent faults.
A cheap laptop cooler (with or without the internal fan working) should provide the protection against damage. Just try to get one with large diameter, low speed fans, to avoid too much noise!
Hope this helps.
I am in the process of planning to build a new computer and trying to way-up all the alternatives (which change from week to week as new components are announced). I will probably ask the experts for advice very soon!
david.
Let's face it, innovation on laptops has slowed down quite a bit. You get what you pay for. No more worth-the-wait advances like much enhanced version of Wifi , USB, or Bluetooth.
I know this is an old topic...but still of interest.
I currently draw professionally using a Lenovo T61 and I have to say, it was money well spent. Bought well before 2005. I installed 8Gb back then and never regretted it. It's currently long in the tooth as the battery has long since passed away and some of the keys take two hits before they respond. The cooling fan died 2 to 3 years ago and I replaced it with one that barely works. It's currently my beater laptop for on the road. I do wireless file transfer using Linux Mint to/from the desktop.
I'm currently looking to replace it with either a new Lenovo, Dell, or System 76. These laptops come highly rated.
Dell and System 76 can be bought with Linux preinstalled. They are pricey, but man...they can fly. The latest SSD have impressive boot speeds...like blink your eyes, and they are ready for work. No lag on drawing with digitizer pads.
Smoking fast Dell computers
and if your wallet is really fat... System 76
These are not for the faint of heart. 
-Harry
Posts: 6,340
Threads: 272
Joined: Oct 2016
Reputation:
563
Operating system(s):
Gimp version: 2.10
(06-29-2017, 09:41 PM)Harry Wrote: I know this is an old topic...but still of interest.
I currently draw professionally using a Lenovo T61 and I have to say, it was money well spent. Bought well before 2005. I installed 8Gb back then and never regretted it. It's currently long in the tooth as the battery has long since passed away and some of the keys take two hits before they respond. The cooling fan died 2 to 3 years ago and I replaced it with one that barely works. It's currently my beater laptop for on the road. I do wireless file transfer using Linux Mint to/from the desktop.
I'm currently looking to replace it with either a new Lenovo, Dell, or System 76. These laptops come highly rated.
Dell and System 76 can be bought with Linux preinstalled. They are pricey, but man...they can fly. The latest SSD have impressive boot speeds...like blink your eyes, and they are ready for work. No lag on drawing with digitizer pads.
Smoking fast Dell computers
and if your wallet is really fat...System 76
These are not for the faint of heart.
-Harry
Had a T60 but that was a very long time ago (I think I have used a T410 and a T430 each for 3-4 years since). Now running a P50. Pricey, but it screams. Also built to some MIL standard: among other things it is resilient to liquid spill on the keyboard, and there is a keyboard drain orifice on the under side (I swear I'm not making this up). As usual with Lenovos, the display is above average.
|
