05-28-2019, 09:17 AM
(This post was last modified: 05-28-2019, 09:31 AM by rich2005.
Edit Reason: edit
)
Quote:..Would that cause the printed image to distort only on the right side leaving it 3mm short ?
Not a distortion. You already have it as close to 83 cm x 50 cm as possible The problem is not keeping the same aspect ratio as the original.
Getting calculator out.
83 cm / 2.54 = 32.67716 inch 32.67716 x 300 ppi = 9803 pixels Edit: If that prints at 827mm wide then there is a problem with the printer.
50 cm / 2.54 = 19.68504 inch 19.68504 x 300 ppi = 5905 pixels
If you want the missing 3 mm on the margin then the size needs to be 9844 x 5906 pix.
Just to throw a spanner in the works
Are you sure you need to use 300 ppi? What is the printing process? Colour photo laser printers typically use 100 pix-per-cm (254 ppi and produce superb results with interpolation). Even with an inkjet 80 x 50 cm is a large print Does it need 300 ppi ? - ask your printer.